No Dust,No Dead Corner
No Cross Contamination
Meet GMP Requirements
Tell us your material or budget, we'll reply you ASAP within 24 hours
FG Series Fluid Bed Dryer
FG series fluid bed dryer is the special equipment used extensively in the pharmaceutical industries to reduce the moisture content of pharmaceutical powder and granules. By using powder granulation. Allpack fluid bed dryers can be used to improve the liquidity and thinner dust. By using powder granulation, to improve solubility properties. You will get your mixing, granulation, and drying finished in one device.
The fluid bed dryer has been widely used in the pharmaceutical industry, foodstuff industry, spice industry, chemical industry, etc.
The working principle of this FG series fluid bed dryer is the powder granule in the fluid bed appears in the state of fluidization. It is preheated and mixed with clean and heated air. At the same time, the solution of adhesive is sprayed into the container. It makes the particles become granulating and contain adhesive. Being unceasingly dry through hot air, the moisture in the granulating is evaporated. The process is carried out continuously. Finally, it forms ideal, uniform, and porous granules.
FG series fluid bed dryer adopts antistatic filtering mediums, that ensure safe operation. Its caking agent atomizer adopts a multi-fluid spray gun to maintain uniform spray particles and to increase the rate of qualified products greatly.
The fluid bed dryer is a no-dead corner equipment that is easy and rapid for feeding or discharging materials and clean of washing to satisfy the GMP standard.
FG Series Fluid Bed Dryer Features:
1. The structure of the fluidization bed is round to avoid a dead angle.
2. Inside the hopper there is a stirrer to avoid agglomeration of raw material and forming a canal of flow.
3. The granule is discharged through the method of turning over. In this way, it is very convenient. The discharging system can be designed as required, too.
4. It is operated at the condition of negative pressure and seal. The air is filtered. Therefore it is simple in operation and convenient in clean. It is an ideal equipment that conforms with the requirements of GMP.
5. The drying speed is fast and the temperature is uniform. In general, the drying time is 15-45 minutes for each batch.
6. Use a screw to extrude and vibrate granule and granulate the granule with the method of humidity, high speed, and mixing
7. Suitable for drying humidity block or powder raw material in fields such as pharmaceutical, foodstuff, feed stuff, chemical industries, and so on.
8. The raw material that is large in granule and small in block and has adhesive property
9. Suitable for raw materials, and their volume will be changed when dry, such as giantarum, polyacrylamide, etc.
FG Series Fluid Bed Dryer Technical Specification:
Drier Machine Related Products
